Измеряйте пропускную способность сети с помощью iPerf2 и iPerf3 на Android
Запускайте тесты пропускной способности с помощью iPerf2 и iPerf3 на Android и измеряйте пропускную способность, потери пакетов, джиттер и другие показатели производительности сети.
Use iPerf2 on Android for network bandwidth and performance measurements, including multiple simultaneous connections.
Run iPerf3 tests directly on Android with support for modern TCP and UDP testing features.
Measure TCP bandwidth and inspect MSS, MTU, socket buffer, and other network parameters.
Generate UDP streams with a specified target bandwidth and measure packet loss and jitter.
Run bandwidth measurements using SCTP over IPv4 and IPv6 networks.
Run multiple simultaneous connections to test network performance under higher traffic loads.
Use iPerf3 JSON output when integrating test results with scripts or other analysis tools.
Perform supported iPerf3 disk read and write tests to evaluate storage-related performance.
O iPerf é uma ferramenta de medição do desempenho da rede portada para Android. Suporta tanto o iPerf2 como o iPerf3 para medir ativamente a largura de banda máxima alcançável das redes IP.
Execute testes de largura de banda entre dispositivos Android e outras plataformas suportadas para avaliar o desempenho da rede e resolver problemas de conectividade.
A aplicação inclui os binários do iPerf2 e do iPerf3.
Para testes de largura de banda de rede, o iPerf2 pode ser útil quando são necessárias várias ligações de cliente simultâneas.
O binário mais recente do iPerf3 foi atualizado para a versão 3.19.1.
Utilize a aplicação Android com instalações do iPerf noutras plataformas suportadas, incluindo:
O iPerf pode apresentar informações como:
Se encontrar um problema, quiser solicitar uma funcionalidade ou tiver comentários sobre a aplicação, contacte:
According to the Google Play data safety declaration, the app does not share data with third parties.
The app may collect app information and performance data, as well as device or other IDs.
Data is encrypted in transit according to the Google Play data safety declaration.
Internet
Required to perform network bandwidth and connectivity measurements.
Network State
Used to obtain information about the current network connection required for network testing.
Wi-Fi State
Used to obtain Wi-Fi network information when performing network measurements.
iPerf is a network performance measurement tool used to measure the maximum achievable bandwidth between network endpoints.
iPerf2 and iPerf3 are separate implementations with different features and behaviors. This app includes both versions so you can choose the appropriate tool for your network test.
Yes. You can use iPerf to measure network throughput between devices connected through Wi-Fi or another IP network.
iPerf primarily measures bandwidth between an iPerf client and server. It is most useful for testing the network path between two endpoints rather than measuring a typical Internet speed-test service.
Yes. UDP testing supports configurable bandwidth streams and can report packet loss and delay jitter.
Yes. Both iPerf2 and iPerf3 support TCP bandwidth testing.
Yes. iPerf supports network testing over IPv4 and IPv6.
Yes. The app can run iPerf server tests so another iPerf client can connect to the Android device.
Yes. The Android app can communicate with iPerf installations on Windows, Linux, macOS, and other supported platforms.