AndroidでiPerf2とiPerf3を使ってネットワーク帯域幅を測定
AndroidでiPerf2とiPerf3の帯域幅テストを実行し、スループット、パケット損失、ジッターなどのネットワーク性能指標を測定できます。
Use iPerf2 on Android for network bandwidth and performance measurements, including multiple simultaneous connections.
Run iPerf3 tests directly on Android with support for modern TCP and UDP testing features.
Measure TCP bandwidth and inspect MSS, MTU, socket buffer, and other network parameters.
Generate UDP streams with a specified target bandwidth and measure packet loss and jitter.
Run bandwidth measurements using SCTP over IPv4 and IPv6 networks.
Run multiple simultaneous connections to test network performance under higher traffic loads.
Use iPerf3 JSON output when integrating test results with scripts or other analysis tools.
Perform supported iPerf3 disk read and write tests to evaluate storage-related performance.
iPerfは、Androidに移植されたネットワーク性能測定ツールです。iPerf2とiPerf3の両方に対応し、IPネットワークで実現可能な最大帯域幅を実際に測定できます。
Android端末とその他の対応プラットフォームとの間で帯域幅テストを実行し、ネットワーク性能の評価や接続問題のトラブルシューティングに役立てることができます。
このアプリにはiPerf2とiPerf3の両方のバイナリが含まれています。
ネットワーク帯域幅のテストでは、複数のクライアント接続を同時に使用する必要がある場合にiPerf2が役立ちます。
最新のiPerf3バイナリは3.19.1に更新されています。
Androidアプリを、以下のようなその他の対応プラットフォームにインストールされたiPerfと組み合わせて使用できます。
iPerfでは、次のような情報を確認できます。
問題が発生した場合、機能のリクエスト、またはアプリへのフィードバックがある場合は、以下までお問い合わせください。
According to the Google Play data safety declaration, the app does not share data with third parties.
The app may collect app information and performance data, as well as device or other IDs.
Data is encrypted in transit according to the Google Play data safety declaration.
Internet
Required to perform network bandwidth and connectivity measurements.
Network State
Used to obtain information about the current network connection required for network testing.
Wi-Fi State
Used to obtain Wi-Fi network information when performing network measurements.
iPerf is a network performance measurement tool used to measure the maximum achievable bandwidth between network endpoints.
iPerf2 and iPerf3 are separate implementations with different features and behaviors. This app includes both versions so you can choose the appropriate tool for your network test.
Yes. You can use iPerf to measure network throughput between devices connected through Wi-Fi or another IP network.
iPerf primarily measures bandwidth between an iPerf client and server. It is most useful for testing the network path between two endpoints rather than measuring a typical Internet speed-test service.
Yes. UDP testing supports configurable bandwidth streams and can report packet loss and delay jitter.
Yes. Both iPerf2 and iPerf3 support TCP bandwidth testing.
Yes. iPerf supports network testing over IPv4 and IPv6.
Yes. The app can run iPerf server tests so another iPerf client can connect to the Android device.
Yes. The Android app can communicate with iPerf installations on Windows, Linux, macOS, and other supported platforms.