Mesurez la bande passante du réseau avec iPerf2 et iPerf3 sur Android
Effectuez des tests de bande passante avec iPerf2 et iPerf3 sur Android et mesurez le débit, la perte de paquets, la gigue et d’autres indicateurs de performances réseau.
Use iPerf2 on Android for network bandwidth and performance measurements, including multiple simultaneous connections.
Run iPerf3 tests directly on Android with support for modern TCP and UDP testing features.
Measure TCP bandwidth and inspect MSS, MTU, socket buffer, and other network parameters.
Generate UDP streams with a specified target bandwidth and measure packet loss and jitter.
Run bandwidth measurements using SCTP over IPv4 and IPv6 networks.
Run multiple simultaneous connections to test network performance under higher traffic loads.
Use iPerf3 JSON output when integrating test results with scripts or other analysis tools.
Perform supported iPerf3 disk read and write tests to evaluate storage-related performance.
iPerf est un outil de mesure des performances réseau porté sur Android. Il prend en charge iPerf2 et iPerf3 pour mesurer activement la bande passante maximale pouvant être atteinte sur les réseaux IP.
Effectuez des tests de bande passante entre des appareils Android et d’autres plateformes prises en charge afin d’évaluer les performances du réseau et de résoudre les problèmes de connectivité.
L’application inclut les binaires iPerf2 et iPerf3.
Pour les tests de bande passante réseau, iPerf2 peut être utile lorsque plusieurs connexions client simultanées sont nécessaires.
Le dernier binaire iPerf3 a été mis à jour vers la version 3.19.1.
Utilisez l’application Android avec les installations d’iPerf sur d’autres plateformes prises en charge, notamment :
iPerf peut fournir des informations telles que :
Si vous rencontrez un problème, souhaitez demander une fonctionnalité ou avez des commentaires sur l’application, contactez-nous à l’adresse :
According to the Google Play data safety declaration, the app does not share data with third parties.
The app may collect app information and performance data, as well as device or other IDs.
Data is encrypted in transit according to the Google Play data safety declaration.
Internet
Required to perform network bandwidth and connectivity measurements.
Network State
Used to obtain information about the current network connection required for network testing.
Wi-Fi State
Used to obtain Wi-Fi network information when performing network measurements.
iPerf is a network performance measurement tool used to measure the maximum achievable bandwidth between network endpoints.
iPerf2 and iPerf3 are separate implementations with different features and behaviors. This app includes both versions so you can choose the appropriate tool for your network test.
Yes. You can use iPerf to measure network throughput between devices connected through Wi-Fi or another IP network.
iPerf primarily measures bandwidth between an iPerf client and server. It is most useful for testing the network path between two endpoints rather than measuring a typical Internet speed-test service.
Yes. UDP testing supports configurable bandwidth streams and can report packet loss and delay jitter.
Yes. Both iPerf2 and iPerf3 support TCP bandwidth testing.
Yes. iPerf supports network testing over IPv4 and IPv6.
Yes. The app can run iPerf server tests so another iPerf client can connect to the Android device.
Yes. The Android app can communicate with iPerf installations on Windows, Linux, macOS, and other supported platforms.