Meça a largura de banda da rede com iPerf2 e iPerf3 no Android
Execute testes de largura de banda com iPerf2 e iPerf3 no Android e meça o throughput, a perda de pacotes, o jitter e outras métricas de desempenho da rede.
Use iPerf2 on Android for network bandwidth and performance measurements, including multiple simultaneous connections.
Run iPerf3 tests directly on Android with support for modern TCP and UDP testing features.
Measure TCP bandwidth and inspect MSS, MTU, socket buffer, and other network parameters.
Generate UDP streams with a specified target bandwidth and measure packet loss and jitter.
Run bandwidth measurements using SCTP over IPv4 and IPv6 networks.
Run multiple simultaneous connections to test network performance under higher traffic loads.
Use iPerf3 JSON output when integrating test results with scripts or other analysis tools.
Perform supported iPerf3 disk read and write tests to evaluate storage-related performance.
O iPerf é uma ferramenta de medição de desempenho de rede portada para Android. Ele oferece suporte ao iPerf2 e ao iPerf3 para medir ativamente a largura de banda máxima que pode ser alcançada em redes IP.
Execute testes de largura de banda entre dispositivos Android e outras plataformas compatíveis para avaliar o desempenho da rede e solucionar problemas de conectividade.
O aplicativo inclui os binários do iPerf2 e do iPerf3.
Para testes de largura de banda de rede, o iPerf2 pode ser útil quando são necessárias várias conexões simultâneas de clientes.
O binário mais recente do iPerf3 foi atualizado para a versão 3.19.1.
Use o aplicativo Android com instalações do iPerf em outras plataformas compatíveis, incluindo:
O iPerf pode informar dados como:
Se você encontrar algum problema, quiser solicitar um recurso ou tiver comentários sobre o aplicativo, entre em contato:
According to the Google Play data safety declaration, the app does not share data with third parties.
The app may collect app information and performance data, as well as device or other IDs.
Data is encrypted in transit according to the Google Play data safety declaration.
Internet
Required to perform network bandwidth and connectivity measurements.
Network State
Used to obtain information about the current network connection required for network testing.
Wi-Fi State
Used to obtain Wi-Fi network information when performing network measurements.
iPerf is a network performance measurement tool used to measure the maximum achievable bandwidth between network endpoints.
iPerf2 and iPerf3 are separate implementations with different features and behaviors. This app includes both versions so you can choose the appropriate tool for your network test.
Yes. You can use iPerf to measure network throughput between devices connected through Wi-Fi or another IP network.
iPerf primarily measures bandwidth between an iPerf client and server. It is most useful for testing the network path between two endpoints rather than measuring a typical Internet speed-test service.
Yes. UDP testing supports configurable bandwidth streams and can report packet loss and delay jitter.
Yes. Both iPerf2 and iPerf3 support TCP bandwidth testing.
Yes. iPerf supports network testing over IPv4 and IPv6.
Yes. The app can run iPerf server tests so another iPerf client can connect to the Android device.
Yes. The Android app can communicate with iPerf installations on Windows, Linux, macOS, and other supported platforms.