Meet de netwerkbandbreedte met iPerf2 en iPerf3 op Android
Voer iPerf2- en iPerf3-bandbreedtetests uit op Android en meet de doorvoer, het pakketverlies, de jitter en andere prestatie-indicatoren van het netwerk.
Use iPerf2 on Android for network bandwidth and performance measurements, including multiple simultaneous connections.
Run iPerf3 tests directly on Android with support for modern TCP and UDP testing features.
Measure TCP bandwidth and inspect MSS, MTU, socket buffer, and other network parameters.
Generate UDP streams with a specified target bandwidth and measure packet loss and jitter.
Run bandwidth measurements using SCTP over IPv4 and IPv6 networks.
Run multiple simultaneous connections to test network performance under higher traffic loads.
Use iPerf3 JSON output when integrating test results with scripts or other analysis tools.
Perform supported iPerf3 disk read and write tests to evaluate storage-related performance.
iPerf is een tool voor het meten van netwerkprestaties, geporteerd naar Android. Het ondersteunt zowel iPerf2 als iPerf3 voor het actief meten van de maximaal haalbare bandbreedte van IP-netwerken.
Voer bandbreedtetests uit tussen Android-apparaten en andere ondersteunde platforms om netwerkprestaties te beoordelen en verbindingsproblemen op te lossen.
De app bevat zowel iPerf2- als iPerf3-binaire bestanden.
Voor het testen van netwerkbandbreedte kan iPerf2 handig zijn wanneer meerdere gelijktijdige clientverbindingen vereist zijn.
Het nieuwste iPerf3-binaire bestand is bijgewerkt naar 3.19.1.
Gebruik de Android-app met iPerf-installaties op andere ondersteunde platforms, waaronder:
iPerf kan informatie rapporteren zoals:
Als je een probleem ondervindt, een functie wilt aanvragen of feedback over de app hebt, neem dan contact op via:
According to the Google Play data safety declaration, the app does not share data with third parties.
The app may collect app information and performance data, as well as device or other IDs.
Data is encrypted in transit according to the Google Play data safety declaration.
Internet
Required to perform network bandwidth and connectivity measurements.
Network State
Used to obtain information about the current network connection required for network testing.
Wi-Fi State
Used to obtain Wi-Fi network information when performing network measurements.
iPerf is a network performance measurement tool used to measure the maximum achievable bandwidth between network endpoints.
iPerf2 and iPerf3 are separate implementations with different features and behaviors. This app includes both versions so you can choose the appropriate tool for your network test.
Yes. You can use iPerf to measure network throughput between devices connected through Wi-Fi or another IP network.
iPerf primarily measures bandwidth between an iPerf client and server. It is most useful for testing the network path between two endpoints rather than measuring a typical Internet speed-test service.
Yes. UDP testing supports configurable bandwidth streams and can report packet loss and delay jitter.
Yes. Both iPerf2 and iPerf3 support TCP bandwidth testing.
Yes. iPerf supports network testing over IPv4 and IPv6.
Yes. The app can run iPerf server tests so another iPerf client can connect to the Android device.
Yes. The Android app can communicate with iPerf installations on Windows, Linux, macOS, and other supported platforms.