Misura la larghezza di banda della rete con iPerf2 e iPerf3 su Android
Esegui test della larghezza di banda con iPerf2 e iPerf3 su Android e misura il throughput, la perdita di pacchetti, il jitter e altre metriche delle prestazioni di rete.
Use iPerf2 on Android for network bandwidth and performance measurements, including multiple simultaneous connections.
Run iPerf3 tests directly on Android with support for modern TCP and UDP testing features.
Measure TCP bandwidth and inspect MSS, MTU, socket buffer, and other network parameters.
Generate UDP streams with a specified target bandwidth and measure packet loss and jitter.
Run bandwidth measurements using SCTP over IPv4 and IPv6 networks.
Run multiple simultaneous connections to test network performance under higher traffic loads.
Use iPerf3 JSON output when integrating test results with scripts or other analysis tools.
Perform supported iPerf3 disk read and write tests to evaluate storage-related performance.
iPerf è uno strumento per la misurazione delle prestazioni di rete portato su Android. Supporta sia iPerf2 che iPerf3 per misurare attivamente la larghezza di banda massima raggiungibile delle reti IP.
Esegui test di larghezza di banda tra dispositivi Android e altre piattaforme supportate per valutare le prestazioni della rete e risolvere i problemi di connettività.
L’app include i binari di iPerf2 e iPerf3.
Per i test della larghezza di banda di rete, iPerf2 può essere utile quando sono necessarie più connessioni client simultanee.
L’ultimo binario di iPerf3 è stato aggiornato alla versione 3.19.1.
Utilizza l’app Android con le installazioni di iPerf sulle altre piattaforme supportate, tra cui:
iPerf può fornire informazioni come:
Se riscontri un problema, vuoi richiedere una funzionalità o hai un feedback sull’app, contatta:
According to the Google Play data safety declaration, the app does not share data with third parties.
The app may collect app information and performance data, as well as device or other IDs.
Data is encrypted in transit according to the Google Play data safety declaration.
Internet
Required to perform network bandwidth and connectivity measurements.
Network State
Used to obtain information about the current network connection required for network testing.
Wi-Fi State
Used to obtain Wi-Fi network information when performing network measurements.
iPerf is a network performance measurement tool used to measure the maximum achievable bandwidth between network endpoints.
iPerf2 and iPerf3 are separate implementations with different features and behaviors. This app includes both versions so you can choose the appropriate tool for your network test.
Yes. You can use iPerf to measure network throughput between devices connected through Wi-Fi or another IP network.
iPerf primarily measures bandwidth between an iPerf client and server. It is most useful for testing the network path between two endpoints rather than measuring a typical Internet speed-test service.
Yes. UDP testing supports configurable bandwidth streams and can report packet loss and delay jitter.
Yes. Both iPerf2 and iPerf3 support TCP bandwidth testing.
Yes. iPerf supports network testing over IPv4 and IPv6.
Yes. The app can run iPerf server tests so another iPerf client can connect to the Android device.
Yes. The Android app can communicate with iPerf installations on Windows, Linux, macOS, and other supported platforms.